Home  Products  Technical   About Magnum   Contact Us   Request a Quote  
 

BENCH MODEL "C" FRAME

FLOOR MODEL "C" FRAME

COLUMN STYLE POST PRESS

Standard MCB Series
MCB6B
6 Ton High Speed Bench Model Gap Frame Press
Standard Equipment

  • Allen Bradley MicroLogix PLC with Panel View HMI based controls
  • 2-Hand No-Tie-Down Start
  • CAT 4 Safety Start Relay
  • Adjustable Tonnage
  • Adjustable Stroke
  • Pressure and Distance Reversal Mode
  • Manual Setup Mode
  • Energy Saver Shut Down
  • Top Stop Over-Run
  • True 2 Speed Ram
  • Electro-Hydraulic Decompression
  • Self-Contained Removable Hydraulic Power Unit
  • Visual Level/Temp Gauge
  • Removable Bolster
  • Lockable Disconnect
  • NEMA enclosures
  • TEFC EISA Compliant Electric Motor
  • Magnetic Starter/ Electronic Overload
  • Single Point Power Connection
  • Magnum Press has a long list of options that you can select from to customize your press the way you need it.
Bench Model Gap Frame Hydraulic Press

Often referred to as a “C” frame hydraulic press, these compact hydraulic presses are available in standard model configurations from 2 ton to 35 tons. These machines can be easily customized for your application. They are designed to be mounted on separate stand or table. These self contained hydraulic presses are suitable for a wide variety of operations including assembly, blanking, coining, forming, punching, riveting and staking. As with any Magnum hydraulic press they can be modified to meet your specific need. They are available in MCB standard gap frame configuration, M2PB 2 post guided tool plate, M4PB 4 post guided tool plate, MGB gib guided and an MCC economical compact version. 		Optional FS-01 Bench


30” High
Click here to download information for the MCB 6B: Magnum MCB 6B
MODEL NUMBER MCB6B High Speed 6 Ton Gap Frame Press
Adjustable Tonnage (rated): 1.2 tons to 6.1 tons
Daylight: 14"
Shut Height: 7"
Throat: 7"
Bolster Left to Right: 13"
Bolster Front to Back: 12"
Stroke Length adjustable: 1" to 7"
Cycles per Min based on listed total stroke and 0.13” work stroke
CPM @ 1” stroke: 90
CPM @ 2” stroke: 115
CPM @ 3” stroke: 98
CPM @ 4” stroke: 80
CPM @ 6” stroke: 67
Reservoir Capacity: 10 gallons
Input Voltage specify: 230/460 VAC 3PH/60Hz
Approximate Foot Print: 27” wide x 42” deep x 40” high
Lower C Height: 9"
Approximate Weight: 735 lbs.
Comments: Specifications subject to change without notice.
 
6 Industrial Dr - Jerseyville, IL 62052
www.magnumpress.com
Phone:618-498-7077
Fax:618-498-7022